|
 |
PC Auto Tensile Tester
Machine Features:-
PC Auto Tensile Tester is applicable in the test of physical
mechanical properties to plastic films, laminated films, flexible
packaging materials, adhesives, adhesive tapes, pressure sensitive
tape, rubber, paper, aluminum-plastic boards and so on. It can do the
test of tensile, tensile resistance and elongation ratio test, hot seal
strength, tearing strength, 180 degree peel (include T peel), and 90
degree peel.
|
|
| 1. Characteristics |
LCD displays data and value, super precision up to 0.5 degree.
Changeable test range, easy to change.
Rated force, elastic modulus, curve analyzed repeatedly.
Super long stroke, satisfy requirement of materials with big
distortion.
Professional software, standard unit, dispense with manual
conversion.
Analyze batch of test results, puts out Max., Min., and average
data.
Data stored as database mode by PC.
Store parameter power down. Parameters stored permanently
when power down.
180° peel, 90° peel, strength of tearing, distortion and so on.
|
| 2. Structure |
It is made up with load cell, micro-processor, load driver, and computer. LCD displays data. Seven speeds are
available. It is designed based on human engineering.
|
| 3. Function introduction |
Computer with the special software controls the equipment, displays curves and results during the full test
process. Outstanding functions of software include multiple analysis of batch of test curves, rated tensile, and
elastic modulus which enable users to obtain the quality controlling parameters.
|
| 4. Test function |
Tensile, tension resistance and distortion, force and strength at the break point, heat seal strength, tear strength,
180°peel (includes T type) and 90°peel
|
5. Operation demo
Type Screen Changer |
Power on -> item screen -> parameter preset -> "Pause" state -> clamp specimen -> start test -> test end,
and automatic return -> send results -> show the results and curve -> save the results -> print out test
results if needed
|
| 6. Technical data |
Specification: 500N, 50N(optional)
Accuracy: +/-0.5 %FS (better than this)
Test speed: 50 100 150 200 250 300 500mm/min
Test width: 0-30-50mm
Stroke: 1000mm
Power consumption: 40W
Dimension: 450(L)mm x 450(D)mm x 1410(H)mm
Ambient condition: Temperature 10 - 40C Humidity 20 - 70%RH
Power: AC 220V 50Hz
Net weight: 68kg
|
| 7. Standard |
ASTM E4, ASTM D828, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904
|
| 8. Configuration |
Standard: Mainframe, controller, panel clamp, computer, software, communication cable.
Optional: Standard roller, test panels, sample cutter, floating roller clamp, unwinding tools for tape roller,
nonstandard clamps. |
|
|
|
